Magigoo PRO PP-GF – 50ml

33,90 €

Liim warp’imise vältimiseks. Sobilik kasutamiseks PP ja PP-GF materjalidega. Välja töötatud peamiselt PP-GF silmas pidades.


Glass-filled polypropylene filaments offer excellent strength, stiffness, and thermal resistance, making them popular for demanding, industrial-grade parts. However, they also have a high tendency to warp during printing. Magigoo Pro PPGF was developed specifically to solve this — acting as a thermally activated interfacial layer between the build plate and the print, it delivers firm adhesion while the bed is hot and releases the part cleanly once it cools.

1 laos (saab järeltellida)

Kategooriad: ,

Kirjeldus

WHAT

Magigoo PP-GF is designed exclusively for use with glass-reinforced polypropylene filaments (GFPP). This adhesive ensures that the prints adhere when the print bed is hot and that the part can be easily removed after cooling.

WHY

Polypropylene (PP) is a thermoplastic semi-crystalline polymer that has properties of good strength, impact resistance and ductility, making it suitable as a construction material. However, PP is a soft material and, like most plastics, can be reinforced by adding fibres to form a polymer composite. These materials are usually stiffer and stronger than the base polymer and can result in a material with a very high strength to weight ratio. Compared to most PP filaments, GF30PP warps to a higher degree. This type of material requires a completely new adhesive formulation to fulfil its characteristic features. .

HOW

Magigoo PP-GF has been developed and tested to work with 30% glass fibre filled polypropylene

  • Shake the bottle vigorously
  • Apply to the desired surface
  • Print according to the filament / printer manufacturer’s recommendations
  • Allow to cool and remove
  • Clean up – Use a damp cloth to wipe off